LMT KIENINGER SpeedLift 可提供配合面和导轨面的有效铣削

This innovation optimizes an especially important job in die and mould making: SpeedLift delivers efficient milling of fitting and guide surfaces.

无人生产、硬质材料以及复杂的切削工作是模具制造工艺所必须面临的一些挑战。在这样的背景下，对定制型创新刀具的需求量相当可观。其中一种突出的刀具产品是LMT 基宁格的SpeedLift 插铣系统。这是专门为配合面和导轨面的半精加工和精加工所研发的一款产品。它可以在插铣过程中保证垂直度和平行度。在总长达300 毫米的范围内，其最大偏差只有0.01 毫米 – 甚至在650毫米以上的较大长度下，也是如此。

Unmanned production, hard materials and complex cutting jobs are just some of the difficult challenges that have to be met in die and mould making. Against this background, there is considerable demand for tailormade tool innovations. An outstanding example of this is LMT Kieninger’s innovative SpeedLift plunge milling system. It was specially developed for the semifinishing and finishing of fitting and guide surfaces. Absolute preservation of angularity is guaranteed in drawing and plunge milling. Over a length of 300 millimetres the maximum deviation is only 0.01 millimetres – and that is even the case with large tool projecting lengths of more than 650 millimetres.

使用刀具系统进行加工，不仅能够获得Rz值小于5μm的工件表面质量，而且操作起来非常简单。此外，它的构成组件也是最少的，刀具的二维调节确保其径向跳动小于3μm。可更换式刀夹及特殊的连接方式使得产品具有灵活应用的特点。直径为66毫米至80毫米的插铣系统配有相应的6 或 8片CBN刀片。这些特点使得产品实现最大的切削速度，从而大大减少了铣削时间。

The tool system not only enables workpiece surface qualities with Rz values of less than 5μm, but also offers simple handling. A minimum number of components enables high-precision, two-dimensional adjustment of the cutters with a radial runout of less than 3μm. The form- and force-fit connection of the exchangeable cartridges enables flexible use. The 66- and 80-millimetre diameter plunge milling systems are equipped with 6 or 8 CBN inserts respectively. These are capable of achieving maximum cutting speeds, which result in dramatically reduced milling times.

SpeedLife 成功案例

Success Story：SpeedLife